Mensaje especial ante el paso del Huracán María:
PuertoRicoSuppliers.com y nuestros suplidores estan operando.
Para mas información, presione aquí.
Hex Head Bolt :: Puerto Rico Suppliers .com
Keywords ( 1 )
 
 
Brands ( 56 )
 
 
Service Providers ( 0 )
242 catalogs found for Hex Head Bolt · Page 1 of 5
 
 
Catalog ID: JN78132
Catalog_6.4.1_Master_R0_114.pdf FASTENERS FASTENERS HEX NUT FIGURE 165H HEAVY HEX NUT TAP MAX WGT Figure 165 FIGURE 165 STANDARD HEX
 
 
Catalog ID: UD78193
4 1 4 165H Strut Nut 7 2 4 SN Hex Head Cap Screw 5 6 3 1 KB Wedge Anchor 1
 
Catalog ID: JN78132
Catalog_6.4.1_Master_R0_114.pdf FASTENERS FASTENERS HEX NUT FIGURE 165H HEAVY HEX NUT TAP MAX WGT Figure 165 FIGURE 165 STANDARD HEX
Size: 1 Pages ( 119 kb )
 
 
Catalog ID: DC78141
III ROD COUPLINGS REDUCING / REGULAR / SIGHT HOLE 8 SECTION IV BOLTS GRADE A / A325 / TAP / B7 10 SECTION V SCREWS LAG LAG / ALL THREAD / STUDS / MACHINE / EYE 25 SECTION VII U BOLTS STANDARD / LIGHT DUTY / DUCTILE IRON 34 SECTION VIII WALL ANCHORS
 
 
Catalog ID: JN78132
Catalog_6.4.1_Master_R0_114.pdf FASTENERS FASTENERS HEX NUT FIGURE 165H HEAVY HEX NUT TAP MAX WGT Figure 165 FIGURE 165 STANDARD HEX
 
 
 
Catalog ID: IS83814
Brand: Crispin
of a different material to flow reversal and offers a head degrees providing more clear- hardness in the disc are the size the Tilting Disc Check Valve has a much lower head loss than a conventional swing check valve. It has three
 
 
Catalog ID: UD78193
4 1 4 165H Strut Nut 7 2 4 SN Hex Head Cap Screw 5 6 3 1 KB Wedge Anchor 1
 
 
 
Catalog ID: JV24228
Brand: Behringer
are available in a single heavy SH unit two 2 bolt design or a double heavy DH unit four 4 bolt design. Clamps are designed to absorb shock and vibration and
 
 
Catalog ID: PU24264
Brand: Behringer
identical clamp halves an arched cover plate and one 1 hex head bolt. Twin weld and cover plates are furnished in plain
 
 
 
Catalog ID: QW25657
Block 6 2 15C 2 Valve Seal Stainless Steel 304 Hex Head Bolt PTFE 7 1 16 1 Stainless Steel 304 Thrust
 
 
Catalog ID: OD26185
Brand: Tolco
800 on the steel beam tighten the cone point set bolts on flange until bolt heads break off. Tighten hex head bolts into clamp body
 
 
 
Catalog ID: DQ52038
Brand: Tolco
Vendor: Universal
800 on the steel beam tighten the cone point set bolts on flange until bolt heads break off. Tighten hex head bolts into clamp body
 
 
Catalog ID: PB48483
Brand: Greenheck
tube axial type. Propeller construction shall be aluminum. A standard hex head bolt shall lock the propeller to the motor shaft. The
 
 
 
Catalog ID: FA49514
Brand: Anvil int.
Vendor: Universal
Place Figure 772 on structural beam by loosening 1/2" hex bolts to correctly position C-clamp bodies. 2. C-clamp bodies
 
 
Catalog ID: DW50159
Vendor: Universal
Disc Retainer Stainless Steel 321517 321517 321517 321544 321544 12 Hex Head Bolt Stainless Steel 321519 321519 321555 321555 321559 "SHOTGUN" TRIM
 
 
 
Catalog ID: PE36220
PGTs per pipe line up to stringline. Fasten PGT with " hex head bolt supplied . PGT attaches to rails with four Simpson Strong
 
 
Catalog ID: WE1309
32 100 28 90 5 SK1621 80 24 TOTAL DYNAMIC HEAD MODEL 820 70 20 Feet Meters Gal. Liters 60 5 45 50 100 30.5 7 26 GALLONS Shut-off Head: 107 ft. 32.6m LITERS 0 40 80 120 160
 
 
 
Catalog ID: OS1310
1. FEET PUMP PERFORMANCE CURVE MODEL 840/841 TOTAL DYNAMIC HEAD/FLOW 130 PER MINUTE SEWAGE 120 36 MODEL 840 841 40 12.2 42 159 61 231 24 TOTAL DYNAMIC HEAD 50 15.2 36 136 61 231 70 60 18
 
 
Catalog ID: DN24262
Brand: Behringer
identical clamp halves a cover plate or washers and 2 hex head bolts. Standard weld plates and cover plates are furnished in
 
 
 
Catalog ID: JB76132
Brand: Anvil int.
Vendor: Universal
Place Figure 772 on structural beam by loosening 1/2" hex bolts to correctly position C-clamp bodies. 2. C-clamp bodies
 
 
Catalog ID: QW25533
or flanged. Flanges shall have ANSI B16.5 Class 150 bolt hole The test pressure should not exceed 1 times the recommended in the manufacturer s standard installation procedures. 3.05 Bolts Nuts and Washers. ASTM F593 304 stainless steel hex head
 
 
 
Catalog ID: MK25520
for leaks. Flanges shall have ANSI B16.5 Class 150 bolt hole patterns. Test pressure shall not exceed 11 2 times bled off from the highest point. Systems shall be brought Bolts Nuts and Washers. ASTM A307 Grade up to test pressure
 
 
Catalog ID: JQ25526
The piping Flanges shall have ANSI B16.5 Class 150 bolt hole patterns. system shall be subjected to 10 pressurization cycles that are subjected to severe temperature cycles shall 3.05 Bolts Nuts and Washers. ASTM F593 304 be tested at 11
 
 
 
Catalog ID: FM25530
the line inspected for leaks. ANSI B16.5 Class 150 bolt hole patterns. The test pressure should not exceed 1 times recommended in the manufacturer s standard installation procedures. 3.05 Bolts Nuts and Washers. ASTM F593 304 stainless steel hex head
 
 
Catalog ID: BB25535
or flanged. Flanges shall have ANSI B16.5 Class 150 bolt hole patterns. The test pressure should not exceed 1 times recommended in the manufacturer s standard installation procedures. 3.05 Bolts Nuts and Washers. ASTM F593 304 stainless steel hex head
 
 
 
Catalog ID: BB25524
the line inspected for leaks. ANSI B16.5 Class 150 bolt hole patterns. The test pressure should not exceed 1 times recommended in the manufacturer s standard installation procedures. 3.05 Bolts Nuts and Washers. ASTM F593 304 stainless steel hex head
 
 
Catalog ID: AE25537
are acceptable. Flanges shall have ANSI B16.1 Class 125 bolt hole patterns. Fittings. Servicing. Trademark of Varco I/P Inc not exceed 11/2 times the maximum rated 3.05 Bolts Nuts and Washers. ASTM A307 Grade B hex head bolts
 
 
 
Catalog ID: UD3193
Brand: Belden
Hardware The Enclosure Mounting Hardware line includes a variety of bolts screws and nuts for securing the enclosure. Description Belden Part Number 4 5/16-18 Hex Head Bolt 4 5/16-18 Hex Nut 8-5
 
 
Catalog ID: CJ53050
Brand: Rotork
Vendor: Universal
Protected Steel - 6 Ball knob Plastic PF/ Fs 31 7 Hex head bolt Steel 8.8 / DIN 933 8 O-ring NBR
 
 
 
Catalog ID: MR82732
Steel 15 Stem Nut 1 304 Stainless Steel 16 Body Bolts 4 304 Stainless Steel 17 Stop Pin 1 304 Stainless Stainless Steel 14 Wrench Block 1 304 Stainless Steel 15 Hex Head Bolt 1 304 Stainless Steel 16 Stop Pin 2
 
 
Catalog ID: LO82574
Steel 15 Stem Nut 1 304 Stainless Steel 16 Body Bolts 4 304 Stainless Steel 17 Stop Pin 1 304 Stainless Stainless Steel 14 Wrench Block 1 304 Stainless Steel 15 Hex Head Bolt 1 304 Stainless Steel 16 Stop Pin 2
 
 
 
Catalog ID: CU24488
Brand: Chemtrol
diaphragm or seating area. Keep the valve open for 7. Hex Head Bolt Zinc Plated Steel proper drying. 8. Protective Cap PE
 
 
Catalog ID: IT76432
Brand: Bretford
interactively and the Fluid Power Whether they re putting their heads System supports them. It brings science together on an experimentis in the up position. 3/4" x 9/16" bolt with 45 angle and 10 take up. Latch Each table
 
 
 
Catalog ID: AQ84325
Brand: Cla-Val
power hoist can be is held in place by flat head machine screws. Use a tight-fitting used to lift valve cover by inserting proper size eye bolt in place of long shank screwdriver to prevent damage to
 
 
Catalog ID: TR26018
Encapsulated heavy duty stainless slotted hygienic design eliminating steel body bolts are protected from entrapment areas smoother sur- outside environment and Block 6 2 15C 2 Valve Seal Stainless Steel 304 Hex Head Bolt PTFE 7 1 16 1 Stainless Steel 304
 
 
 
Catalog ID: LW26020
Encapsulated heavy duty stainless slotted hygienic design eliminating steel body bolts are protected from entrapment areas smoother sur- outside environment and Block 6 2 15C 2 Valve Seal Stainless Steel 304 Hex Head Bolt PTFE 7 1 16 1 Stainless Steel 304
 
 
Catalog ID: PK53649
Vendor: Universal
sizes " " 1" 1" and 2". Flanged ANSI Class 150 and bolting and valve construction 300 full-port valves are available in 2" if ordered with Hydro Test Style: Three-piece four-bolt "- 2" Speci cations: ANSI B16.25 Butt Weld Ends Three
 
 
 
Catalog ID: GD84116
Brand: Cla-Val
larger valves the seat is held in place by flat head machine screws. Use a tight-fitting long shank screwdriver to used to lift valve cover by inserting proper size eye bolt in place of essary to use a piece of angle
 
 
Catalog ID: GC84298
Brand: Cla-Val
between remove the two 10-32 Socket hydrant and coupler. Head screws retaining the 28296-01B Lock 4" or The dimensional 28286-01B Handle. Tool required - 0.094 2.39 mm Hex Allen Wrench. Opening the poppet by rotating the operating handle
 
 
 
Catalog ID: DF85507
Hosting Sites technology for efficient gas Shorter case provides more head Banks & Financial recombination over 99% and room for easier maintenance copper alloy insert terminal to accept 1/4-20 UNC bolt Terminal Hardware Torque 110 in.-lbs. 12.4 N-m
 
 
Catalog ID: QV85634
Brand: Belimo
retainer ring by set screws to lock stops or thrust bolt arrangements are used seat and retainer ring in position on valve for larger valve sizes. sizes 2 through 30 . Socket head cap screws are used on valve sizes 36 WEDGE PINS
 
 
 
Catalog ID: AS85638
Brand: Belimo
cap retaining washers 1 . 2. Using 2 wrenches or at-head screwdrivers pry cap assembly 2 out of valve. 3. Use hex bolts & nuts to secure valve to ange. 3. 4. Ensure
 
 
Catalog ID: QA84307
Brand: Cla-Val
bar P 100G-01KO ANTI-CAVITATION VALVE CURVES PIPE PLUG HEX NUT COVER SOLID LINE IS FULL OPEN FLOW CURVES FOR FT/SEC INTERMITTENT DUTY APPLICATIONS 400 PIPE PLUG 300 Cover Bolt 6" and Smaller COVER BEARING 100 PRESSURE DROP psi SPRING
 
 
 
Catalog ID: MV84200
Brand: Cla-Val
FLOW CURVES AT 18 FT/SEC FOR CONTINUOUS DUTY APPLICATIONS HEX NUT DASHED LINE IS FULL OPEN FLOW CURVE AT 25 APPLICATIONS COVER 10" and Larger 400 300 PIPE PLUG Cover Bolt 6" and Smaller 100 COVER BEARING PRESSURE DROP psi SPRING
 
 
Catalog ID: KQ84308
Brand: Cla-Val
OPEN FLOW CURVES FOR 18 FT/SEC CONTINUOUS DUTY APPLICATIONS HEX NUT COVER DASHED LINE IS FULL OPEN FLOW CURVE FOR DUTY APPLICATIONS 8" and Larger 400 PIPE PLUG 300 Cover Bolt 6" and Smaller COVER BEARING 100 PRESSURE DROP psi SPRING
 
 
 
Catalog ID: HQ84295
Brand: Cla-Val
power hoist can be is held in place by flat head machine screws. Use a tight-fitting used to lift valve cover by inserting proper size eye bolt in place of long shank screwdriver to prevent damage to
 
 
Catalog ID: BC84327
Brand: Cla-Val
demand. damage is evident. Be sure Main Valve cover nuts/bolts are tight. As Downstream pressure is managed pressure in some maintenance. You will need a 3/16 X 4 slim head screwdriver to set low pressure. NOTE: BEFORE THE VALVE IS
 
 
 
Catalog ID: RG83973
Brand: Drain All
4 300700 Control Air Filter Assembly 1/4" NPT Aluminum Head Polycarbonate Bowl Push Drain 1 5 300800 Hex Nipple 1/4" NPT 1-1/8" L Brass 1
 
 
Catalog ID: QR83971
Brand: Drain All
14 300700 Control Air Filter Assembly 1/4" NPT Aluminum Head Polycarbonate Bowl Push Drain 1 15 300800 Hex Nipple 1/4" NPT 1-1/8" L Brass 1
 
 
 
Catalog ID: MG83969
Brand: Drain All
4 300700 Control Air Filter Assembly 1/4" NPT Aluminum Head Polycarbonate Bowl Push Drain 1 5 300800 Hex Nipple 1/4" NPT 1-1/8" L Brass 1
 
 
Catalog ID: FE83965
Brand: Drain All
the air 2. Remove the Drain-All from the box header pipe a few feet downstream from Even though the Drain Most Drain-All Inc. the balance line to an air header connect mended that the system be blown down products do
 
Page 1 of 5
Previous
Items per page: